LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transmission Cooling - 6F50/6F55) >> Diagnosis And Testing >> Transaxle Cooling >> Check Transmission Fluid Level and Condition >> Transmission Fluid Condition Check

Transmission Fluid Condition Check

WARNING: This page is about a different variant/trim than selected.
  1. Check the transmission fluid level.
  2. Hold the transmission fluid level indicator over a white facial tissue and allow the transmission fluid to drip onto the facial tissue and examine the stain.
  3. If evidence of solid material is found, the transmission fluid pan should be removed for further inspection.
  4. If transmission fluid contamination or transaxle failure is confirmed by the sediment in the bottom of the transmission fluid pan, repair the transaxle and clean the transmission fluid cooler tubes and the transmission fluid cooler.
  5. If the transaxle is to be overhauled or if installing a new transaxle, the transmission fluid cooler must be backflushed. Refer to AUTOMATIC TRANSMISSION - 6F50/6F55 .
scientia non olet · About LEMON Manuals