LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Side And Rear Vision) >> Diagnosis And Testing >> Blind Spot Monitoring >> DTC Charts >> Instrument Panel Cluster (IPC) DTC Chart

Instrument Panel Cluster (IPC) DTC Chart

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This module utilizes a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
DTC Description Action
U0533:56 Invalid Data Received From Side Obstacle Detection Control Module-Left: Invalid/Incompatible Configuration REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
U0533:82 Invalid Data Received From Side Obstacle Detection Control Module-Left: Alive/Sequence Counter Incorrect/Not Updated REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
U0534:56 Invalid Data Received From Side Obstacle Detection Control Module-Right: Invalid/Incompatible Configuration REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
U0534:82 Invalid Data Received From Side Obstacle Detection Control Module-Right: Alive/Sequence Counter Incorrect/Not Updated REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
scientia non olet · About LEMON Manuals