Removal and Installation
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Open the roof opening panel to the VENT position.
- Detach the top of the concertina blind from the moving glass frame.
- Open the roof opening panel to the fully OPEN position.
- Detach the bottom of the concertina blind from the guide track and remove the blind.
- To install, the blind should be attached to the guide track in the most forward position.
- To install, reverse the removal procedure.