LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (HVAC - Climate Control System) >> Removal And Installation >> Register - Driver Side, MKX >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach the left finish panel from the instrument panel and position the left finish panel aside.
  2. Remove the 2 driver side register screws.
  3. Remove the driver side register.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals