LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (HVAC - Climate Control System) >> Removal And Installation >> Ambient Air Temperature Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. For additional information, refer to BUMPERS .
  2. Disconnect the ambient air temperature sensor electrical connector and remove the ambient air temperature sensor.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals