LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Automatic Transmission Cooling System - 6F50/6F55) >> Removal And Installation >> Transmission Fluid Cooler Tubes >> Removal

Transmission Fluid Cooler Tubes: Removal

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. Remove the front bumper cover. Refer to BUMPERS .
  3. Remove the air cleaner. Refer to INTAKE AIR DISTRIBUTION AND FILTERING .
  4. Remove the air cleaner outlet pipe. Refer to INTAKE AIR DISTRIBUTION AND FILTERING .
  5. Remove the battery. Refer to BATTERY, MOUNTING AND CABLES .
  6. G08980164
  7. G08980165
  8. Remove or install a cable tie.
    G08980166
  9. G08980167
  10. Special Tool(s): Disconnect Tool, Transmission Cooler Line 307-569.
    G08980168
  11. G08980169
  12. On both sides.
    G08980170
  13. G08980171
  14. G08980172
  15. G08616166
  16. Special Tool(s): Disconnect Tool, Transmission Cooler Line 307-569.
    G08616157
  17. Discard the specified component. Follow local disposal regulations.
    G08616158
  18. G08616159
  19. G08616160
  20. G08616161
scientia non olet · About LEMON Manuals