LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Bumper System) >> Removal And Installation >> Bumper - Exploded View, Rear

Bumper - Exploded View, Rear

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD .

Rear Bumper Cover Assembly - MKX Shown in illustration, Edge Similar 

Fig 1: Exploded View Of Rear Bumper Cover Assembly
G07403324Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W710763 Lower rear bumper cover-to-rear splash shield bolt (2 required)
2 W706805 Lower rear bumper cover-to-rear underbody bolt
3 W710250 Upper rear bumper cover pin-type retainer (8 required/Edge 6 required)
4 N807658 Upper rear bumper cover bolt (2 required)
5 17D942/17D943 Rear bumper cover support bracket (RH/LH)
6 W714599 Rear bumper cover support rivet (5 required)
7 W704277 Rear bumper cover support bracket nut (2 required)
8 W710763 Rear splash shield retainers (4 required)

Rear Bumper Cover Components - MKX Shown in illustration, Edge Similar 

Fig 2: Identifying Rear Bumper Cover Related Components
G07403325Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Parking aid sensor cover (part of 15K859)
2 17K835 Lower rear bumper cover
3 17810 Upper rear bumper cover
4 W702852 Upper rear bumper cover-to-lower rear bumper cover rivet (2 required)
5 17E855 Upper rear bumper cover support
6 15K859 Rear parking aid sensor (if equipped, 4 required)
7 - Rear parking aid sensor electrical connector (part of 14N139)
8 W704817 Upper rear bumper cover support clip (2 required)
  1. For additional information, refer to the appropriate .