LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 278 (Body System - Uni-Body, SUBFRAME & Mounting System) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Description Nm lb-ft lb-in
Brake caliper-to-knuckle bolt 70 52 -
Brake caliper-to-rear hub spindle bolts 70 52 -
Bushing brace-to-body bolts 25 18 -
Crossbrace-to-front subframe support bracket bolts 90 66 -
Driveshaft-to-rear drive unit flange bolt 70 52 -
Front lower bumper-to-subframe washer-nut 9 - 80
Front subframe support bracket bolts 90 66 -
Front subframe support bracket nuts 133 98 -
Front subframe mounting nuts 133 98 -
Lower control arm-to-knuckle nut 55 41 -
Lower shock nut 80 59 -
Outer tie-rod end nuts 48 35 -
Pressure line bracket-to-engine nut 9 - 80
Pressure line clamp plate bolt 26 19 -
Pressure line-to-steering gear banjo bolt 48 35 -
Rear shock-to-trailing link lower nut 80 59 -
Rear subframe mounting nuts 90 66 -
Roll restrictor-to-subframe bolt 115 85 -
Roll restrictor heat shield nut 11 - 97
Stabilizer link nuts (rear) 35 26 -
Steering column shaft-to-steering gear bolt 25 18 -
Steering gear heat shield bolts 6 - 53
Steering line bracket-to-steering gear bracket bolts 9 - 80
Steering line bracket-to-subframe bolts 9 - 80
Subframe brace-to-body bolt 25 18 -
Subframe mounting bolts 150 111 -
Subframe support bracket bolts 90 66 -
Subframe support bracket nuts 133 98 -
Subframe-to-lower bumper nuts 9 - 80
Trailing link bolts 47 35 -
Upper stabilizer shaft link nuts 35 26 -