LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Engine Controls - Fuel Charging And Controls - 2.0L GTDI) >> General Procedures >> Fuel Injection Pump Tappet Inspection

Fuel Injection Pump Tappet Inspection

WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the fuel injection pump tappet for flat spots or scoring, especially in the indicated areas. Visual check.
    G08030298
  2. If any damage is found, inspect the fuel injection pump and the fuel injection pump tappet drive lobe. Install new components as necessary.
scientia non olet · About LEMON Manuals