Removal and Installation
WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 6 ignition coil-on-plugs. For additional information, refer to IGNITION COIL-ON-PLUG .
-
NOTE: Only use hand tools when removing or installing the spark plugs or damage can occur to the cylinder head or spark plug.NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
Remove the 6 spark plugs.
- To install, tighten to 15 Nm (133 lb-in).
- Inspect the 6 spark plugs. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION .
- To install, reverse the removal procedure.
- Adjust the spark plug gap as necessary.