LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Automatic Transaxle External Controls) >> Description And Operation >> External Controls >> Pinpoint Tests >> Pinpoint Test E: DTC P1780 (TCS) >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The TCS  is a momentary contact switch located on the selector lever. Pressing the TCS  will engage or disengage the O/D  function of the transmission. When the O/D  is disengaged, the O/D icon will illuminate OFF on the IPC. Each time the ignition switch is cycled, the transmission will automatically provide O/D  operation regardless of TCS  position the last time the engine was running.

DTC FAULT TRIGGER CONDITION

DTC Description Fault Trigger Conditions
P1780 TCS  Circuit Failure The TCS  failed during the self-test.
scientia non olet · About LEMON Manuals