LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Automatic Transaxle External Controls) >> Description And Operation >> External Controls >> Pinpoint Tests >> Pinpoint Test D: DTCs P0815, P0816 (Paddle Shift) >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The paddle shifter switch is a toggle switch integral to the steering column. When the selector lever is placed in the manual shift position, the upshift/downshift feature becomes activated and allows the operator to upshift or downshift without removing there hands from the steering wheel. If a new switch is required install a new paddle shift assembly.

DTC FAULT TRIGGER CONDITION

DTC Description Fault Trigger Conditions
P0815 The PCM Detects A Voltage High Signal When An Upshift Is Requested Open or short circuit to the upshift switch.
P0816 The PCM Detects A Voltage High Signal When A Downshift Is Requested Open or short circuit to the downshift switch.