LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Intelligent Access (IA) Antenna - Liftgate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper cover. For additional information, refer to BUMPERS .
  2. Disconnect the liftgate IA  antenna electrical connector.
  3. Remove the 2 pin-type retainers and the liftgate IA  antenna.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals