Removal and Installation
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Mark the hood latch position prior to removal of the hood latch bolts.
Remove the 2 hood latch bolts and position the hood latch aside.
- To install, tighten to 11 Nm (97 lb-in).
- Disconnect the hood latch release cable and remove the hood latch.
-
NOTE: When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.
To install, reverse the removal procedure.