LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Handles, Locks, Latches And Entry Systems) >> General Procedures >> Remote Memory Activation

Remote Memory Activation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the driver seat and exterior mirror to the desired positions.
  2. Press and hold either memory button (1 or 2) for 5 seconds. A tone will be heard after about 2 seconds confirming the memory position has been set. Continue to hold until a second tone is heard after 5 seconds.
  3. Within 3 seconds, press the LOCK button on the Remote Keyless Entry (RKE) transmitter.
  4. Wait 10 seconds, then press the UNLOCK button.
  5. If a second memory setting is desired, repeat the procedure for the second memory button and the second RKE  transmitter.
scientia non olet · About LEMON Manuals