LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Handles, Locks, Latches And Entry Systems) >> General Procedures >> Keyless Entry Keypad Code Programming >> Remote Function Actuator (RFA) Module Keyless Entry Keypad Code Reset

Remote Function Actuator (RFA) Module Keyless Entry Keypad Code Reset

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure is for transferring the factory keyless entry keycode from the Body Control Module (BCM) and programming it into the Remote Function Actuator (RFA) module.
  1. Carry out the keyless entry keypad code reset on the scan tool following the on-screen instructions.
    • The keyless entry keypad code reset procedure is found on the scan tool under Toolbox>Body>Security.
scientia non olet · About LEMON Manuals