Driver/Passenger Door Intelligent Access (IA) Feature
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The IA
feature is a programmable parameter and can be enabled/disabled with a scan tool. If the feature is disabled, the Intelligent Access (IA) feature to enter the vehicle and passive starting will be inoperative. To start the vehicle, the IA
key has to be placed in the backup slot. Refer to
MODULE CONFIGURATION
for information on enabling/disabling the IA
feature.
The driver/passenger door IA feature allows the doors to be locked or unlocked without having to use the door lock cylinder or the Remote Keyless Entry (RKE) transmitter feature. With a programmed IA key within 1 m (3 ft) outside the driver or passenger front door, touch the lock or unlock sensor on the exterior door handle. The doors lock or unlock depending upon which sensor was touched on the handle. The unlock sensor is located on the inside of the handle and the lock sensor is located on the outside face of the handle.