LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Wiper System & Washer System) >> Removal And Installation >> Wiper/Washer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper and lower steering column shrouds. For additional information, refer to STEERING COLUMN .
  2. Position the steering wheel in order to gain access to the wiper/washer switch screws.
  3. Remove the 2 wiper/washer switch screws.
  4. Remove the wiper/washer switch.
  5. To install, reverse the removal procedure.