Removal and Installation
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- Using a suitable flat-bladed tool (such as a trim remover), remove the instrument panel speaker cover by prying upward to disengage the clips.
Edge
- Remove the 2 screws and the instrument panel speaker.
- Disconnect the electrical connector.
MKX
- Remove the 3 screws and the instrument panel speaker.
- Disconnect the electrical connector.
All vehicles
- To install, reverse the removal procedure.