Steering Wheel Controls
The steering wheel controls consist of a series of resistors. Each steering wheel control switch function corresponds with a specific resistance value within the switch. When a switch is pressed, the Steering Column Control Module (SCCM) monitors the change in reference voltage to determine the requested function. The SCCM communicates the switch inputs in a message to the IPC over the HS-CAN . The IPC gateways the message to the ACM and other audio modules over the I-CAN .
For Edge base and premium audio systems without SYNC®, the FCDIM serves as the infotainment display. The 5-way RH steering wheel switch is used to control and navigate the menus in the FCDIM . For Sony® and THX® sound, the RH instrument panel display serves as the infotainment display. The 5-way RH steering wheel switch controls and navigates the menus in the RH instrument panel display.