LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Anti-Theft System - Passive Anti-Theft System (Pats)) >> Removal And Installation >> Backup Transceiver

Backup Transceiver

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD .
Fig 1: Identifying Push Nut Round And Backup Transceiver With Electrical Connector
G07402595Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Backup transceiver electrical connector (part of 14B079)
2 045A06 Push nut round (4 required)
3 15607 Backup transceiver
  1. Remove the floor console selector trim panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the power point. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. For Edge only, remove the media hub. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEMS .