LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Anti-Theft System - Passive Anti-Theft System (Pats)) >> General Procedures >> Passive Anti-Theft System (PATS) Parameter Reset >> Without Intelligent Access (IA)

Without Intelligent Access (IA)

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the key from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to enter PATS  security access.
  3. NOTE: If the Body Control Module (BCM) was replaced at least 2 keys must be programmed to the BCM  . After completing this step, leave the scan tool connected and follow the ERASE ALL KEYS AND PROGRAM TWO KEYS .

    From the scan tool, select "Parameter Reset" and follow the IDS  on-screen instructions.

scientia non olet · About LEMON Manuals