LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Anti-Theft System - Passive Anti-Theft System (Pats)) >> General Procedures >> MyKey® Programming >> Clear MyKey™

Clear MyKey™

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If disabling an IA  key, make sure only the admin key is inside the vehicle. It does not need to be in the backup transceiver slot.
  1. NOTE: This procedure clears the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.

    Using an admin key, turn the ignition to RUN.

  2. From the message center main menu, use the up and down arrow buttons to scroll to and select Settings. Press the OK button.
  3. Use the up and down arrow buttons to scroll to and select MyKey. Press the OK button.
  4. Use the up and down arrow buttons to scroll to and select Clear MyKeys. Press the OK button.
scientia non olet · About LEMON Manuals