LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Anti-Theft System - Passive Anti-Theft System (Pats)) >> General Procedures >> Key Programming Using Diagnostic Equipment >> Program Additional Ignition Key - Without Intelligent Access (IA)

Program Additional Ignition Key - Without Intelligent Access (IA)

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If 8 keys are already programmed, this procedure does not allow any more Passive Anti-Theft System (PATS) keys to be programmed without erasing all stored key codes first.
  1. Insert the unprogrammed PATS  key into the ignition and turn the key from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to enter PATS  security access.
  3. From the scan tool menu select "Program additional ignition key" and follow the IDS  on-screen instructions.
  4. The engine should now start with the new PATS  key.
scientia non olet · About LEMON Manuals