LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Anti-Theft System - Passive Anti-Theft System (Pats)) >> General Procedures >> Key Programming - Enable/Disable Spare Key Programming

Key Programming - Enable/Disable Spare Key Programming

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL DESCRIPTION

G06136947
 Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: This procedure provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature and KEY PROGRAMMING - PROGRAM A KEY USING TWO PROGRAMMED KEYS . If spare key programming is disabled, spare keys can only be programmed by using the KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT .
  1. Turn the ignition from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to enter PATS  security access.
  3. From the scan tool menu select "Customer Spare Key Programming Enable" or "Customer Spare Key Programming Disable" and follow the IDS  on-screen instructions.
scientia non olet · About LEMON Manuals