Removal and Installation
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Separate the Instrument Panel Cluster (IPC) opening trim from the upper steering column shroud.
- Pull upward on the rearward portion of the upper steering column shroud to separate the clips from the lower steering column shroud.
- Roll the upper steering column shroud upward on the hinge point and then pull straight rearward to remove the upper steering column shroud.
- Remove the 3 screws and the lower steering column shroud.
- To install, tighten to 3 Nm (27 lb-in).
- To install, reverse the removal procedure.