LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Electronic Engine Controls) >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid - 2.0L GTDI >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve cover. For additional information, REFER to ENGINE -2.0L GTDI .
  2. Remove the 2 bolts and the Variable Camshaft Timing (VCT) oil control solenoids.
    • To install, tighten to 10 Nm (89 lb-in).
      G08030599
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals