Removal and Installation
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the battery. For additional information, refer to BATTERY .
- Remove the battery cable harness locator from the battery tray.
- Remove the battery tray bolt.
- To install, tighten to 9 Nm (80 lb-in).
- Remove the battery tray-to-bracket bolt.
- To install, tighten to 9 Nm (80 lb-in).
- Remove the battery tray nut.
- To install, tighten to 9 Nm (80 lb-in).
- Remove the battery tray.
- To install, reverse the removal procedure.