Battery Current Sensor: Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The battery current sensor must be installed in the proper position and orientation to function correctly.

With the battery current sensor tape tab pointing downward, position the battery current sensor to the index-mark on the battery cable and secure with electrical tape.
Connect the battery current sensor electrical connector.
Connect the negative battery cable terminal to the battery terminal and install the battery terminal nut.
- Tighten to 9 Nm (80 lb-in).