Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

1. NOTE: Loosen the nut, do not remove.
  
  Tighten to 9 Nm (80 lb-in).
2. Tighten to 9 Nm (80 lb-in).
1. Tighten to 9 Nm (80 lb-in).
2. Tighten to 9 Nm (80 lb-in).
3. NOTE: Loosen the nut, do not remove.
  
  Tighten to 9 Nm (80 lb-in).
1. Tighten to 9 Nm (80 lb-in).
1. Tighten to 17 (150 lb-in).
2. Tighten to 12 (106 lb-in).
3. Tighten to 5 (44 lb-in).
4. Tighten to 17 (150 lb-in).
To install, reverse the removal procedure.