LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Seat System - Seats) >> General Procedures >> Seat Wire Harness Routing - Front Passenger Cushion >> Power Seat Track Without Heat >> Front of Cushion Frame and Power Seat Track From Underneath

Front of Cushion Frame and Power Seat Track From Underneath

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Power Seat Track With Heat Components (Front Of Cushion Frame And Power Seat Track From Underneath)
G06504428Courtesy of FORD MOTOR CO.
Item Description
1 Seat control switch and rear height motor takeout must be routed on top of the bracket
2 Wire harness attachment points
3 Horizontal motor electrical connector
4 Safety belt buckle switch electrical connector pin-type retainer attached in place