LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Seat System - Seats) >> Diagnosis And Testing >> Seating >> Pinpoint Tests >> Pinpoint Test AW: DTCs B1317, B1318 and B2486 >> Normal Operation - Dual Climate Controlled Seat Module (DCSM)

Normal Operation - Dual Climate Controlled Seat Module (DCSM)

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The Dual Climate Controlled Seat Module (DCSM) monitors the input voltage for correct operation. If the DCSM  detects input voltage below 10 volts or above 15 volts, it stores DTC B2486 in memory. If DTC B2486 sets, the DCSM  enters a standby mode and suspends the system outputs for the operation of both seats until system voltage between 10 and 15 volts is restored and a climate controlled seat switch button is selected on.

This pinpoint test is intended to diagnose the following: