LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Steering Wheel Rotation Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clockspring. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals