LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Power Brake Actuation - Brake Booster) >> Removal And Installation >> Brake Vacuum Pump >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR SYSTEM COMPONENTS - EXPLODED VIEW .
  2. G08028122
    • To install, tighten to 10 Nm (89 lb-in).
      G08028123
  3. Inspect and, if necessary, install a new brake vacuum pump gasket.
    G08028124
  4. To install, reverse the removal procedure.