LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Parking Brake System - Parking Brake & Actuation) >> Removal And Installation >> Parking Brake Warning Indicator Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the parking brake warning indicator switch electrical connector.
  2. Remove the parking brake warning indicator switch screw and the parking brake warning indicator switch.
  3. To install, reverse the removal procedure.