LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Front Drive HALFSHAFTS) >> Removal And Installation >> Intermediate Shaft - Front Wheel Drive (FWD) >> Removal

Intermediate Shaft - Front Wheel Drive (FWD): Removal

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Remove the RH halfshaft. For additional information, refer to HALFSHAFT - RH  .

    Vehicles equipped with 3.5L, 3.7L 

  2. Remove the 2 intermediate shaft bracket-to-block stud bolts.
  3. Remove the intermediate shaft bracket-to-block bolt.

    Vehicles equipped with 2.0L GTDI 

  4. Remove the 2 intermediate shaft support bracket nuts.

    All vehicles 

  5. Carefully remove the intermediate shaft while supporting both ends of the intermediate shaft.
    Fig 1: Removing Intermediate Shaft
    G09291492Courtesy of FORD MOTOR CO.