LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Front Drive HALFSHAFTS) >> Removal And Installation >> Intermediate Shaft - All Wheel Drive (AWD) >> Installation

Intermediate Shaft - All Wheel Drive (AWD): Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new intermediate shaft seal in the Power Transfer Unit (PTU). For additional information, refer to TRANSFER CASE - POWER TRANSFER UNIT (PTU) .
  2. Position the intermediate shaft in the PTU  and engage the intermediate shaft splines with the PTU  gears.
  3. Install the 2 intermediate shaft support bracket bolts.
    • Tighten to 40 Nm (30 lb-ft).
  4. Install the right halfshaft. For additional information, refer to HALFSHAFT - RH  .
scientia non olet · About LEMON Manuals