LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Four Wheel Drive (4WD) Systems) >> Diagnosis And Testing >> All Wheel Drive (AWD) Systems >> Pinpoint Tests >> Pinpoint Test D: DTCs P188C and P188D >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The AWD  system uses data from other systems as inputs to the PCM. The PCM uses the inputs to determine the appropriate duty cycle to send to the AWD  relay on the command circuit and returns AWD  relay information on the feedback circuit.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P188C AWD  Relay Module Communication Circuit When the PCM detects an open, a short to ground or voltage on the command circuit.
P188D AWD  Relay Module Feedback Circuit When the PCM detects an open, a short to ground or voltage on the feedback circuit.