Removal and Installation
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the steering column shrouds. For additional information, refer to STEERING COLUMN .
- Turn the steering wheel 90 degrees to the left to access the multifunction switch screws.
- If equipped, remove the steering column control switch. For additional information, refer to STEERING COLUMN CONTROL SWITCH .
- Remove the multifunction switch screws and the multifunction switch.
- To install, tighten to 3 Nm (27 lb-in).
- To install, reverse the removal procedure.