LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Steering Column Switches) >> Diagnosis And Testing >> Steering Column Switches >> Pinpoint Tests >> Pinpoint Test O: DTC B1310:12 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is placed in RUN mode, the Body Control Module (BCM) module provides a ground for the coil (control) side of the run/start relay located in the Battery Junction Box (BJB). The BCM  monitors the run/start relay control circuit and sets a DTC if the circuit is open, shorted to ground or shorted to voltage.

This pinpoint test is intended to diagnose the following: