Hardwired Inputs
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The IPC requires hardwired inputs from components that are not hardwired to other modules and, therefore, are not on either the High Speed Controller Area Network (HS-CAN) or the Medium Speed Controller Area Network (MS-CAN) but are required for specific IPC functions or gateway requirements. The hardwired inputs are provided by the following components:
- Fuel pump module
- Fuel level sensor (optional dual sender saddle-type tank only)
- HS-CAN
- Infotainment Controller Area Network (I-CAN)
- Park detect switch (part of the floor shifter assembly)
- Washer fluid level switch