LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Rear Disc Brake System) >> Removal And Installation >> Rear Disc Brake >> Installation

Rear Disc Brake: Installation

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from brake disc and wheel hub.
    • Use specified brake parts cleaner to clean the brake disc and hub mating surfaces.
  2. Apply a thin coat of specified anti-seize lubricant to the hub flange.
  3. Install the brake disc.
  4. Install a new brake disc screw.
    • Tighten to 20 Nm (177 lb-in).
  5. Position the brake caliper and brake caliper anchor plate assembly and install 2 new brake caliper anchor plate bolts.
    • Tighten to 90 Nm (66 lb-ft).
    • Apply brakes several times to verify correct brake operation.
  6. Install the wheel and tire. For additional information, refer to WHEELS AND TIRES .
scientia non olet · About LEMON Manuals