LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Body Panel System - Front End Body Panels) >> Removal And Installation >> Grille Shutter Assembly >> Removal

Grille Shutter Assembly: Removal

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. For additional information, refer to BUMPERS .
    • Tighten to 4 Nm (35 lb-in).
      G09298456
scientia non olet · About LEMON Manuals