Toe Link: Removal
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Suspension fasteners affect performance of vital components and systems and their failure may result in major service expense. If replacement is necessary install new parts with the same part numbers or equivalent part. Do not use a replacement part of lesser quality or substitute design. Tighten the fasteners to specification during reassembly.
NOTE:
Tighten the suspension bushing fasteners with the weight of the vehicle resting on the wheels and tires or incorrect clamp load and bushing damage may occur.
- Remove the wheel and tire. For additional information, refer to WHEELS AND TIRES .
- Remove and discard the toe link inboard nut and cam bolt and remove the toe link adjuster cam.
- Remove and discard the toe link outboard bolt and nut and remove the toe link.