LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and wheel hub. For additional information, refer to WHEEL BEARING AND WHEEL HUB .
  2. Using a suitable press, remove the wheel stud from the wheel bearing and hub assembly.
    Fig 1: Removing Wheel Stud From Wheel Bearing And Hub Assembly Using Suitable Press
    G06269389Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals