LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Engine System - General Information) >> General Procedures >> Piston Pin Bore Diameter

Piston Pin Bore Diameter

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate Engine article for the specification.
  1. NOTE: Piston and piston pins are a matched set and should not be interchanged.

    Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.

    Fig 1: Identifying Piston Pin Bore Diameter Measuring Direction
    G06064074Courtesy of FORD MOTOR CO.