LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Engine System - General Information) >> Diagnosis And Testing >> Engine >> Oil Pressure Test

Oil Pressure Test

WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and remove the oil pressure switch from the engine.
  2. Connect the engine Oil Pressure Gauge to the oil pressure switch oil galley port.
  3. Run the engine until normal operating temperature is reached.
  4. Run the engine at the specified rpm and record the gauge reading.
  5. The oil pressure should be within specifications; refer to the SPECIFICATION  .
  6. If the pressure is not within specification, check the following possible sources:
    • Insufficient oil
    • Oil leakage
    • Worn or damaged oil pump
    • Oil pump screen cover and tube
    • Excessive main bearing clearance
    • Excessive connecting rod bearing clearance
    • Chain tensioner leak
scientia non olet · About LEMON Manuals