Brake System
WARNING: This page is about a different car, the 2014 Lincoln MKX and 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The brake system consists of the following components:
- Front and rear disc brakes
- Cable/caliper actuated parking brake
- Brake master cylinder and fluid reservoir
- Vacuum-assisted power brake booster
- Four-wheel ABS
- Red brake light indicator
The brake pedal is connected to the power brake booster, which is connected to the brake master cylinder. When the brake pedal is pressed, brake fluid is pushed through the brake tubes and hoses to the front and rear disc brake calipers. The brake fluid enters the disc brake calipers, forcing the caliper pistons and brake pads outward against the brake disc friction surface, slowing or stopping rotation. When the brake pedal is released, brake fluid pressure is relieved, returning the front and rear disc brake caliper pistons and brake pads to the unapplied position.
For additional information on the following:
- Front disc brakes, refer to FRONT DISC BRAKE .
- Rear brakes, refer to Refer to the appropriate Brake System for the procedure.
- Parking brake actuation, refer to PARKING BRAKE AND ACTUATION .
- Hydraulic brake actuation, refer to HYDRAULIC BRAKE ACTUATION .
- Vacuum-assisted power brake booster, refer to POWER BRAKE ACTUATION .
- ABS, refer to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .