Transaxle Case Bushing: Installation
WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Special tool(s): Installer, Bushing 307-664, Handle 205-153 (T80T-4000-W).
- Clean the specified component with the specified material.
Special tool(s): Installer, Bushing 307-664, Handle 205-153 (T80T-4000-W).
-
- Tighten to 12 Nm (106 lb-in).
- Install a new LH halfshaft seal. For additional information, refer to HALFSHAFT SEAL - LH .