LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Edge SEL, 2.0L Eng VIN 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission - 6F35) >> Diagnosis And Testing >> Automatic Transmission >> Diagnostic Routines >> Pinpoint Test O: U0140, U0141 >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The TCM  uses information contained in messages from the BCM sent on the HS-CAN  .

DTC FAULT TRIGGER CONDITION

DTC Description Fault Trigger Conditions
U0140 Lost Communication With BCM  This DTC sets if the TCM  does not receive an expected message from the BCM  .
U0141 Lost Communication With BCM  "A" This DTC sets if the TCM  does not receive an expected message from the BCM  .